I fixed these spark plugs for my CBR 250, original product. Delivery condition of the product was at its best. well packed with safety. Im recommending anyone to use this product for who are searching for genuine products for the bikes. Thank you so much Team webike for your superb service!
View Detail
- Sale
- Instock
563.74 BDT (690 JPY) 735.32 BDT Save 23%
Webike Point: +7 pt
(5.71 BDT)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
HORNET
99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4
-
HORNET-S
PC34 European specification [displacement]600 [number of units required]4
-
VFR800
98-01 Reimport [displacement]800 [number of units required]4
-
XR250R
95- [displacement]250 [number of units required]1
See all
HONDA
Product detail
[Stock Number] 7502
[Shape] Screw type
[Size]
Screw diameter: Φ10.0mm
Screw length: 19.0mm (semi-screw type)
Hexagon dihedral width: Hex 16.0mm
[NGK part number] CR9EH-9
[Type] Resister Plug
Plug unit and terminal image: [2-b] See Image 6
[Heat Value] 9
[Compatibility Information] DENSO Compatibility: U27FER9
Compatible HONDA stock part number: 98059-59916
**Even if you purchase in units of 10 pieces (1 box), it will not be delivered in 1 box.
*Terminals, tightening angle, etc. may differ depending on the model.Please refer to the link for the detailed fitting and installation instructions..
* The image is only for reference. The image shown may differ from the actual product.
Webike has all NGK plugs in stock! .
* The item may be temporarily out of stock due to manufacturer shortages, etc
Stable ignition performance and combustion efficiency at a reasonable price.It brings out the true performance of the engine.
[Features of Register plug]
A ceramic resistor is built in to suppress the ignition noise generated at the time of spark.
・The built-in ceramic resistor suppresses the ignition noise generated by the spark.
・Prevents radio noise in car radios, mobile hams, and car telephones.It also prevents the engine control computer from malfunctioning due to noise.
*The effect varies depending on the vehicle.
[About the shape of the plug terminal]
●Select a terminal shape that matches the engine and plug cord installation side.
There are three types of plug terminals: integrated type, separate type, screw type, and punch-and-caulk type.
Mainly, "integral type" and "punch caulking type" are used for four-wheeled vehicles and "screw type" for two-wheeled vehicles, and "separate type" is available for plugs used for both four-wheeled and two-wheeled vehicles.
In addition, the terminal part of the "separate type" can be removed, but the terminal part of the "integrated type" and "punch-and-caulk type" cannot be removed.If you try to remove it forcibly, the terminal part may be broken.
In case of using the "separate type" as the "screw type", remove the terminal nut.
When using the product with the terminal nut attached, make sure that it is not loose, and if it is loose, tighten it lightly with pliers or the like.
| [Features of NGK plug] |
| - This is a super "wide range" plug - |
| The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
 |
| Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
| ■ Heat value of the plug |
| - High alumina porcelain from New Ceramics is used as the insulator - |
| - Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
| - Strong and airtight in construction - |
| Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
| Special Nickel alloy electrodes are used for superior durability. |
 |
| - Corrugations in the insulator ensure good insulation and prevent flashover - |
| During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
| What is a flashover... |
| It is a spark between the terminal and the main unit fitting as shown in the image. |
 |
| ■ Flashover |
| ■The advantages of the plug |
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
- ALL
- Japan (694)
- Australia (22)
- South Korea (13)
- United Kingdom (13)
- Russia (10)
- Sri Lanka (5)
- United States (5)
- New Zealand (3)
- (2)
- Belarus (2)
- Canada (2)
- Hungary (2)
- Malaysia (2)
- Philippines (2)
- Sweden (2)
- Chile (1)
- India (1)
- Israel (1)
- Thailand (1)
- Turkey (1)
- Ukraine (1)
- Kazakhstan (1)
Fits:HONDA CB650F 14- RC83 14.4- [displacement]650 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750F 94- RC36 [displacement]750 [number of units required]4, HONDA CBR900RR Fire blade 92-99 SC28/SC33 [displacement]900 [number of units required]4
Installed on: HONDA CBR250R (MC17/MC19)
Fits:HONDA CB650F 14- RC83 14.4- [displacement]650 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750F 94- RC36 [displacement]750 [number of units required]4, HONDA CBR900RR Fire blade 92-99 SC28/SC33 [displacement]900 [number of units required]4
Jan 4, 2024
i havE used NGK Plug CR9EH-9 7502 spark plugs they are the best for long run.i have used this spark plugs on my honda Hornet 250 1998 model they work very well no maintainance required.best performance..
View Detail
Helpful?
Fits:HONDA CB650F 14- RC83 14.4- [displacement]650 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750F 94- RC36 [displacement]750 [number of units required]4, HONDA CBR900RR Fire blade 92-99 SC28/SC33 [displacement]900 [number of units required]4
Installed on: HONDA HORNET250 (CB250F)
Nov 15, 2023
I used NGK plug for honda hornet 250 .good product.Best performance.All package very well and no damaged anything in the order..Thank you webike!
View DetailHelpful?
Fits:HONDA CB650F 14- RC83 14.4- [displacement]650 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750F 94- RC36 [displacement]750 [number of units required]4, HONDA CBR900RR Fire blade 92-99 SC28/SC33 [displacement]900 [number of units required]4
Mar 21, 2022
It rained quite a bit the night before.
I tried to go out Sunday morning in Nihari-kun.
It would not start. I've tried pushing it about 20 times, but no luck.
So. Plug replacement.
It was bishy.
After replacing it. It started easily.
Well, it's not really worth writing an impresario (laughs).
And the electrodes aren't decreasing at all.
Burning is not a bad thing.
But it's so bishy (laughs).
I pulled Chalk even though it was humid.... Failure.
But I wish it were more serviceable.
It takes about 30 minutes.
This is not a story to be written in Plug's impressions (laughs).
Helpful?
Fits:HONDA CB650F 14- RC83 14.4- [displacement]650 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750F 94- RC36 [displacement]750 [number of units required]4, HONDA CBR900RR Fire blade 92-99 SC28/SC33 [displacement]900 [number of units required]4
Aug 7, 2021
For MC19.
It's a standard number 9.
Even in the mini1000 race, I'm number 7. It is terrible (laugh)
I don't use Windshield IRIDIUM as it is Carburetor Vehicles.
Since I strengthened the Coil, it might be good to widen the PlugGap a little more to get a strong spark.
Well, but...the MC19 is out of my hands...lol
Helpful?
New Custom Articles
