- O-ring for CROSS CUB (JA45) level gaugeOnce a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.Read More
- CROSS CUB (JA45) ORing of Oil Filter section.When replacing Filters every two Oil changes, it is inexpensive and cosmetic.Read More
- CROSS CUB (JA45) ORing of oil drain bolt section.Replace every Oil replacement, cheap and cosmetic.Read More
- Oil replacement was done as the weather became cooler. This time, I replaced the Oil Filter Cover and Valve O-Ring together. I generally replace the O-Ring and Oil Filter Cover after about one year.Th...Read More
- The summer heat is over and the weather is getting cooler, so we decided to replace the Oil Filter Cover O-Ring. This time, we decided to replace the O-Ring of the Oil Filter Cover and purchased one f...Read More
- I removed the Front Tappet Cover to put in the High Camshaft and put the Front Tappet Cover back on without changing the O-Ring, and the oil seeped out, seeped out, seeped out.Read More
- I don't think OEM is necessary. If the inner and outer diameters are the same and they are heat and oil resistant, it is acceptable.Read More
- (Reference is at your own risk...)XR250BAJA (1998 MD30/MD17E) was experiencing after fire while running. the front of the engine was particularly noisy, so we investigated and found an oil leak from t...Read More
- About quality and texture: I am happy with the quality of the tappet cover O-Rings from K-Pit, made from a soft flexible rubber to help create a good seal.
About the feeling of use: After removing...Read More - About quality and texture: I am happy with the quality of the oil level gauge O-Ring from K-Pit, made from a soft flexible rubber to help create a good seal.
About the feeling of use: The previous ...Read More - O-rings are indispensable for replacing oil in old cars.I have used K-PIT's O-rings on other motorcycles with no problems and they are my favorite O-rings. I don't feel any physical sensation, but I t...Read More
- About quality and texture: I am happy with the quality of the crankshaft hole cap O-Ring, made from a soft flexible rubber to help create a good seal.
About the feeling of use: The previous owner had...Read More - About quality and texture: I am happy with the quality of the timing hole cap O-Ring, made from a soft rubber to flex and seal to create a good seal.
About the feeling of use: The previous owner had ...Read More - Replace it with a new one every time to prevent oil leakage.Read More
- We were having problems with coolant leakage from the L-shaped Pipe, but the leakage has completely stopped.Read More
- Used to replace the DrivenEngine Cover on a 92 Grom.It's only about 50mm, but I don't think there are any problems with the oil seeping out.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING