I have been growing up in the off-road field, but now the on-road vehicles have been added to the field.
I chose this one, which was the cheapest for that maintenance.
The Roller makes it easy to lift it. I am very satisfied with it.
The one drawback is that it gets stuck in storage, and when I stored it outdoors it got rusty.
[How is it used?
JC92 Grom's Wheel cleaning and
I purchased this for ChainMaintenance.
There are plenty of cheaper products out there.
I was excited because if you are stingy with the price of tools that you use for a long time, you will regret it later.
Was the one you received as per Image?
It was as per Image and the packaging was very well done.
How was your experience with it?
It can be easily lifted up with one hand and does not wobble.
(It is about to go up too vigorously. w)
[Points to note]
Use a tool to lock the front brake or a thicker rubber band.
It might be better to make sure the car body doesn't move.
How did it compare to other products?
JTrip's products are a little more expensive than other products, but
Repair Parts are plentiful and well made.
If you are going to use it for a long time, I don't think you will regret your choice.View Detail
The Maintenance Stand is narrower than the general size.
When the maintenance stand of the normal size is used for the SmallEngine Displacement Volume car with the narrow width of the swing arm, the wobble in the lateral direction is large because it is necessary to extend the parts of the receiving part near the limit, and it is quite uneasy.
This is especially true when using the L-shaped receptacle, which has a high degree of freedom in the hooking part and tends to wobble.
It was Outclassing compatibility with MOTARD which can not use V-shaped receiving because of narrow body width and no boss.
Off vehicles have a strong Image to hang a LiftType STAND under the belly, but MOTARDs don't have as much height under the belly as Off vehicles, so you often can't use a STAND for Offfor Vehicle…
In addition, the STAND of Offfor Vehicle's LiftType usually wobbles during work due to its structure and support points, but if it is this STAND, wobble is small and you can work with peace of mind.
In addition, since it is a narrow Short Type, the space taken when storing/using it is small.
The thickness and colo of the Pipe is the same as the normal Size, so if the width is right, it may be used normally for vehicles over 400cc.
The manufacturer says it cannot be used, so it is only self-responsibility.View Detail
I bought this because it would be handy to have when doing maintenance.
Size is also just right.
The weight of the vehicle is light, so it can be easily lifted with one hand.View Detail
I bought this to play around with my Grom.
I was OdoOdoOdoing it, thinking I'd cock it up before I got used to it.
Once you get used to it, it's easy to hang.
The Swing Arm has a JT-104L4 receiver.View Detail
I bought it to use for YZF-R25
I used to use the wider one, but when I looked at it, I saw that SmallEngine I purchased this product because it was available for Displacement Volume
The actual product is Compact and easy to use
It's also nice to have a choice of colors
I bought the red color this time, but there are various colors to choose from, such as blue and green, so you can choose your You can also choose the color of your motorcycle
It's also good because you can change the Hook to accommodate L and V shapes
I use this roller stand when I load the car, but cars are very wide It's obvious, isn't it?
It's not easy to use the Large and long ones when loading the Transporter Right?
In that respect, this Narrow type is modest in height and width, so people who load it in their cars may think it is a good idea These are very useful items
I've written some good points so far, butmmmm! I would also like to write a few things that I think are
First of all, it has a roller stand, so of course it has a roller, but when you use it, you can see that it is The screws on this Roller are coming loose
It's just a matter of tightening it up, but if it's taken off unexpectedly, it will result in the loss of the Bolt For this reason, we recommend tightening the Screw Lock firmly
Next, it's so nice to be able to swap hooks and adjust the height too! But I think this area is gradually becoming more and more governed
It's fine for use, but I feel like I'll need to repurchase it if I get as far as I'm going
I've mentioned the good points and the mumbo-jumbo, but now a few of the comfort points
It takes a little bit of a hang when you give it a short length
It's easier to give it to you if you push it underneath the Tire instead of underneath it
Cheap STAND like the cheapest STAND you can find at a certain Oakshon or the cheapest you can find in a proper store STAND is a power relationship (fulcrum, point of force, point of action?) in that area I remember it being hard to raise if it's not thought out, but this is not that It's been thought about
It's easy to turn the Tire when cleaning the chain, so if you're on a motorcycle, you can use it to clean the chain This is an item that I think you should have at least one STAND
View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING