-
Reviews
-
I used it on my WR125R.
This product has been removed or currently not available.
Excellent
I used it on my WR125R.It is replaced at the same time as the Tire replacement.
After all, it's a different feeling of security at the galleys, etc.!
As the name suggests, the thickness and weight of the Rubber is heavy, so installation is a bit of a challenge.
Reviews For Current Product From Other Webike User
Excellent
Epitome of Heavy Duty TubeIRC make an excellent Heavy Duty tube. This makes it resistant the punchers and pinch flats. I think the best side benefit though in fact is by being a thick tube, its harder to pinch the tube when installing a new tyre. I hate going to all the effort of installing a new tyre only to find I put a hole in the tube with the levers and have to start again!View Detail
Very Good
I don't want to be sad during the Enduro raceUsed on SEROW225 Rear tires.
In the Enduro race, which is a severe Situation, it is necessary to set Large air pressure (= 0 kg of air pressure), so this one, which is difficult to puncture, is needed.
Anyway, it is thick. The insertion was Large strange, but it seems not to puncture in rare cases.View Detail
Excellent
Highly durableI bought it for driving on forest roads with Puncture prevention.
We have never punctured this before.
However, if you put a Bead stopper in this Tube, it is Large strange to replace the Tire.
Repairing on a forest road may be a challenge if you are not used to it.
The product itself is very good.View Detail
Excellent
It's heavy and hard.If you're going to be running Woods etc. at low pressure, it's a good idea to build this.
Bead stopperQuantity:2pc. There is no Trouble so far with the combination of Set and this Tube.
On the other hand, if you don't go to hard places, you don't need to go this far.
It's pretty tough to build in.
You can make it a little smoother by putting in the tube after installing the One Side of the Tire.
Be careful not to put the Tire Lever too deep even if it is a Heavy tube.View Detail
Average
It might not make sense for city driving.I bought it to see what is the difference from normal tube. I used it for 3 years and when I changed the tire, I found that the rubber was peeled off. It seems that the tube is not one layer but two layers, or the outer one deteriorated and peeled off. I think it is good for off-road driving.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING