?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: SUZUKI LETSBasket (CA4AA-110571 or later), SUZUKI LETSG (CA4AA-100001 or later), SUZUKI LETS (CA4AA-100001 or later), SUZUKI LETS5G (CA47A-100001 or later), SUZUKI LETS5 (CA47A-100001 or later) View more
When you use normal muffler, you can feel the acceleration.
If you install external parts, the torque drops and the acceleration is not good.
I tried various weights of the Weight Roller, but it was difficult to set.
As a result, I changed to DAYTONA.
Fits: SUZUKI LETSBasket (CA4AA-110571 or later), SUZUKI LETSG (CA4AA-100001 or later), SUZUKI LETS (CA4AA-100001 or later), SUZUKI LETS5G (CA47A-100001 or later), SUZUKI LETS5 (CA47A-100001 or later)
Item numbers:02-01-7026 through 02-01-7027 are Exclusive HONDA Motorcycle, not Pulley for ADDRESS V50.
To begin with, the height of the Pulley is not suitable for SUZUKI cars, and the center is out of alignment due to poor manufacturing precision, and as a matter of course, the body of the car vibrates strangely every time it turns.
It is not high enough and interferes with Drive face, etc., causing a buzzing noise.
Also, what you will receive will be different in shape from what is shown in the picture.
If you continue to use it, you will get irreparable damage to the Shaft and it will be scrapped.
The Objection to TAKEGAWA was passed once, but the second Objection was not passed when they sent me a similar product.
For SUZUKI cars, this product is sold without Spec. modification and should never be used.View Detail
Fits: SUZUKI LETSBasket (CA4AA-110571 or later), SUZUKI LETSG (CA4AA-100001 or later), SUZUKI LETS (CA4AA-100001 or later), SUZUKI LETS5G (CA47A-100001 or later), SUZUKI LETS5 (CA47A-100001 or later)
I've decided to commute on LETS4, but I'm afraid of the fast flowing Bypass.
Since I had already obtained YellowNumber, I built this product so that I could go with the flow at the speed limit of 60?Bypass.
By the way, the maximum speed in Normal pulley is 50?/h.
This product is available in Slide Piece, Weight Roller and Quantity.:Since it is a Set, there is nothing to prepare for Others.
I put it together and the top speed is over 60?/h. The limit is still unmeasured.
The weight roller is 5g, but the engine speed at the start is low, so I will try setting it in the future.
I think I can now commute to work on the Bypass stream with peace of mind.View Detail
Fits: SUZUKI ADDRESSV125 (CF4EA-100001-), SUZUKI ADDRESSV125S (CF4MA-100001), SUZUKI ADDRESSV125 (CF46A-100001-)
Una pieza muy buena y e podido sacar muy buen rendimiento en mi motoAbout quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useAbout DesignAbout Size ChartCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingView Detail
Fits: SUZUKI ADDRESSV125 (CF4EA-100001-), SUZUKI ADDRESSV125S (CF4MA-100001), SUZUKI ADDRESSV125 (CF46A-100001-)
FINAL SPEED INCREASED BY 30%. FOR A LONG TIME WE HAVE WORKED WITH TAKEGAWA HIGH SPEED PULLEYS POE THEIR GOOD PERFORMANCE AND QUALITY THIS IS A PRODUCT THAT WILL MEET YOUR NEEDS AT THE TIME OF INSTALLING IT. A VERY RECOMMENDED PRODUCT View Detail
Fits: HONDA PCX125 (jf28-1000001-1099999), HONDA PCX125 (JF28-1100001-), HONDA PCX150 (KF12-1000001-)
Вариатор является хорошим выбором и постараюсь объяснить почему, поскольку замеров с приборами не проводилось, то буду опираться на собственные ощущения от установки сего девайса. Итак, первое: при старте - вибрации значительно ниже, что существенно повышает комфорт! Второе: сам старт не такой резкий, хотя и происходит с оборотов несколько выше, чем при ОЕМ вариаторе. Набор скорости происходит линейнее, ровнее, без провалов. На скорости 80км/ч, судя по звуку двигателя, обороты ниже чем на ОЕМ, что должно повлечь за собой топливную эффективность.P.S. На фото в коробке вариатор ОЕМ после замены! Вариатор Takegawa был блестящий и красивый.The variator is a good choice and I will try to explain why, since there were no measurements with the instruments, I will rely on my own feelings about the installation of this device. So, first: at the start - the vibrations are much lower, which significantly increases the comfort! Secondly: the start itself is not so sharp, although it occurs from revolutions slightly higher than with the OEM variator. Speed dialing is more linear, more even, without failures. At a speed of 80 km / h, judging by the sound of the engine, the speed is lower than the OEM, which should entail fuel efficiency.P.S. In the photo in the box variator OEM after replacement! The Takegawa variator was brilliant and beautiful.translated by Google TranslatorView Detail
very good for use in my super dio AF28 much more power band but the top speed decrease a little bit. Great product from webikeView Detail
Nice smooth performance. Smpoth immediate responces on acceleration. Top end only smooth easily reached but no increase of top end. Only smoothness and quick reaponces no top end achievement nor additional. Good cruising smoothnessView Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING