1,349.26 BDT
(1,860 JPY)
1,120.03 BDT
(1,544 JPY)
(17% OFF)
4 (18 Reviews)
Very Good
It's a must-have, the soul in a small tool?I am the second generation as my predecessor is getting tired.
It can be used to turn the bolt and nut of the Small Torque by hand, and after tightening the bolt to a certain degree, it can be used to manage the Torque with the digital ratchet at the end.
I am Regular in almost Bolt nut fastening work, such as from narrow and normally medium Torque is using Large body.
To prevent breakage, the Ratchet is then fitted and fastened to the Ratchet when turning it by hand, which allows for quicker work.
The resin part is good-looking, but KTC's product is lighter than other companies' products, so perhaps this resin is fine.
Furthermore, I think the reason for the "Pink" resin is to make it stand out in the tool box so that it can be easily picked up.
If my guess is correct, I'm convinced that KTC is the quintessential KTC.
Reviews For KTC 9.5sq. Quick Spinner From Other Webike User
Poor
Costa bad!I have the one from Tone and it is convenient, so I bought it to see if there is a difference.
I bought the one from Tone for 800 yen on Amazon, but this one is about 1300 yen.
As for the quality of things, I think Tone is better. (Material is iron over there?).
This is Plastic.
It is marked every 90-degrees, so if you want to tighten angles or if you don't want to use KTC, you can buy this one.
Personally, I prefer tones as a cosmetic and object.View Detail
Average
Surprisingly difficultI bought it because I thought it would be convenient.
Since it is a KTC, the texture is solid and not easily broken.
The grip is also processed to prevent slipping.
It does not slip when turned with greasy hands and is functionally up to par.
Just my opinion after using it.
I'm not sure if it would be dramatically more convenient, but it's quite a hassle to put it on and take it off.
Always use a quantity on the Ratchet Handlebar rather than a Single Body.:Set and then use the
I feel that it will be used by turning it around when it is loose.
I don't suddenly loosen the bolt on the Ratchet Handlebar, and the Ratchet Head is too big to fit in tight places.
The situations in which they are used are currently limited.
Usage may need to be considered.View Detail
Very Good
Convenient quick-turn toolThis will come in handy.
When you tighten it temporarily, you can turn it round and round to make your work more efficient.
I just think the texture of Plastic is a bit….
I went with KTC because I wanted to keep it together, but the texture is better on the Tonne.View Detail
Excellent
I can't wait to add it to my toolbox friends.I was not sure if it is the same as Tone Tool, but Kyoto Tool is Red color and the handwheel is Material:It's made of Plastic so if it falls out of your hand it won't damage the other parts. Tone looks like it's made of some kind of steel in the picture….
Hand tightening the rear caliper bolt is now easier.View Detail
Most Viewed Reviews Of KTC Other Hand Tools
Excellent
Thickness GaugeAbout quality and texture - Excellent quality, nicely stamped steel sheet with no rough edges.About the feeling of use - I have the longer set which works great in all the situations I have used them in so far, allowing for two hand operation.Products to buy together - Great idea to add a spark plug gapping tool to your measurement tooling, NeoFactory have a nice afforadable one, product # 016520.Difficulty of installation - Easy to select the correct size with the nice visible labelling on each guage and easy to manoeuvre with the long series gauge set.Cost performance and comparison with other products - The long series set is expensive and if you can afford it worth the extra cost but Webike have more afforadable options in their hand tooling others menu.About shipping and packaging - Arrived on time and without damage from the well packed and affordable sea freight.Any concerns, cautions, or advice when purchasing - Read the product listings for the thickness gauges carefully as some are labelled in mm and inches but not all.View Detail
Excellent
Outstanding Made in Japan Prybar. I have been trying to source Made in Japan prybars for a quite some time now. Unlike the Kowa models these are actually made in Japan and are very nice and scream quality. You don't need the giant ones offered by other manufactures to work on motorcycles and I'm happy to report that all 3 sizes are fantastic. I puchased all 3 sizes offered and I think they should sell them as a set. For whatever reason the shortest one is the most expensive and almost twice the cost of the longer 2. View Detail
Poor
Costa bad!I have the one from Tone and it is convenient, so I bought it to see if there is a difference.
I bought the one from Tone for 800 yen on Amazon, but this one is about 1300 yen.
As for the quality of things, I think Tone is better. (Material is iron over there?).
This is Plastic.
It is marked every 90-degrees, so if you want to tighten angles or if you don't want to use KTC, you can buy this one.
Personally, I prefer tones as a cosmetic and object.View Detail
Very Good
At the back of the toolbox.This one is always in the back of the tool box. w
I don't get a chance to use it very often, but it is in the back of my tool box, wondering when I will use it.
The handle is easy to use and easy to apply force.View Detail
Excellent
GoodIt is useful for picking up Nuts and Bolts that have been dropped in a crevice.
The magnetic force is strong enough so that it will not fall off in the process.
Shaft free, so it is easy to reach the targeted area.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING