Genuine Kawasaki Front Fork Bushing for KX250 2019

This bike came in with a leaky seal on the left fork which clearly needed addressing. A new set was in mind rather than changing just the one. Finding the right set for this smaller bike was pretty easy as I used the Kawasaki schematics for the forks. The price of this set from Webike was great value and better than I thought they would be. With a few other parts in my basket, my order was placed and shipped using EMS as they get my order delivered fast. In 7 days from being shipped, the order arrived in tact and 100% perfect. These are smaller parts and were inside a made bubble wrap envelope by Webike warehouse. Good idea guys! The fork seals were in the standard Kawasaki packets as always. They are very well made and are a thicker rubber with some give but not too much to become saggy. No extra bits of rubber or anything. Fitting was a bit of a pain but once everything was off ready to accept the seals, the job was finished quickly. Very pleased with these fork seals, thank you Webike. View Detail

The motorcycle leg bolt ensures solid and safe mounting, which is crucial for the stability and precision of driving the vehicle.View Detail

This was a replacement for the existing hose clamp that had been beaten up over the years. Although you probably can get away with not being perfect but if you are like me, if a job needs doing, it needs doing well. Not specifically an expensive part so why not just change it. FInding the right part was not hard as I do use the help pages and links Webike provide on their help pages. I also cross referenced with Kawasaki schematics to make doubly sure. The part was good value for what it does. I do always have more than one part in my basket for ordering as this help spread the cost of shipping. I used EMS as I have done for a number of months now, and every time, my order arrives promptly and on time. 5 days from being shipped from Webike warehouse and my order arrived. The parts were all really well packaged and no damage to anything at all. The hose clamp also consists of the plastic ring and metal bracket which both looked great. Really well made and thought out. Fitting is really quick as it just bolts on. As there is already a split in the ring, you can feed the hose down in it with no issues. Very pleased with this purchase and the bike looks great. View Detail

This bike, the MT10 , a new clutch cable was needed as the existing one was starting to fray. No point in waiting for it to actually snap so this needed replacing fast. After checking on Webike website, I found them to have an absolutely fantastic price, well less than half what they are in the UK from genuine Yamaha parts dealer. Unfortunately though, the Yamaha dealer in the UK could not give an estimate of when they would be able to get the parts needed. Not an issue with Webike. As these were part of a larger order with other MT10 parts, the shipping was brilliant, not expensive and not too cheap, express delivery is what I went for. From ordering all the different parts in the order to being delivered to my door was literally just 7 days. Including a weekend and the wait time for Webike to source the parts from the different manufacturers. How good is that. Upon receipt, the box was perfect and as Webike package all these very well indeed, nothing was damaged. There was also another layer of padding on top. What more can you ask for. The cable came in it's own Yamaha packet and was in perfect condition when it arrived. The lug was secure, the cable nicely lubricated so slide through the guide outer easily. Fitting is not difficult on an road bike as not really much gets in the way. Now the clutch feels a whole lot better. Happy days. Great company, great service, great genuine products. 10 out of 10 for Webike. Very happy customer. View Detail

A little bit of a service and new oil change including oil filter for this FZ1N. The filter was easy to find, it also fits a few different models so is readily available. The price was really good, and still better than could source locally for the same K&N part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS Fast service as it gets to me very quickly and the tracking is full, I mean full as in every step of the journey. I know exactly when the order will be delivered, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape. There is not really much to say about the finish of this oil filter as there is not really much you can see, the black paint is clean, the K&N logo is easily seen and the threaded part is super smooth. With this oil filter, I always like the fact you have a nut on the end so it is easy to tighten and loosen when needed. The seal is intact and no tears, rips of dinks. Nothing is bad with K&N oil filters at all. Never had any problems. The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal. Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike for all your help with the order contents. View Detail

I wanted to purchase a new pinlock with a slight smoke filter with it. I did look at the genuine Arai ones but the smoke did not look that dark for what I wanted. Having previously purchased a yellow insert for this helmet, I decided I would try this brand again as the previous insert was excellent. It was not hard to find this visor insert as I already had it in my watch list. The price for this insert was a lot better value than the genuine Arai and as I said before, the smoke was a lot deeper and what I needed. With a couple of other parts in my basket, I got them all shipped using EMS. The order arrived in 7 days from being shipped, great courier service. The insert was kept nice and flat and was not damaged in any way during transit. The insert itself fits perfectly with the MAX VISION visor. The smoke is just right, not too light and not a black colour either. All in all, I am very happy with this purchase and I might even try the photochromatic one next as the price is also excellent. Great serive Webike, great packaging, no issues at all.View Detail

Due to maintenance the bearings on the rear wheel needed replacing. Rather than go for aftermarket ones, we went for the genuine Yamaha ones. No point in messing around with poor fitting after market ones. The correct bearing part number was found using the help tools on Webike pages. The cost of the bearings was really good value. Better than I thought if I am honest. The old ones were not fully done with but there was slight movement so this was only going to get worse over time. With a few other parts for the bearing change and were all shipped together by EMS all arrived at my door in 7 days. Very well packaged and in perfect condition, Having already removed the old bearings, it was clear that these were going to fail very soon, compared to the new ones, the movement was a little clunky and ever so slightly notchy unlike the new ones which were silky smooth. The bearing are super clean and run really well. No complaints from me on that score. Fitting bearings you do need to take a little care. If you do not have an adequate drift then you could damage them before even the first ride. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol. Thanks for the help Webike, great work. View Detail

One of the hanger pins on this bike was problematic and the cause was that someone had cross threaded it when they were doing some kind of maintenance. There was no simple and easy fix apart from just buying a new one. Simple as that. Finding the right pin was straight forward by checking Honda schematics. The schematics showed the right one and this was then searched for on Webike. Webike price was far better than I could source from my local Honda dealer. You do need 2 of these and even though one was perfectly ok, I decided to just buy 2 at this price. With a few other small parts, I had the entire order shipped using EMS. In just 7 days from being shipped, my order arrived. The pin hangers arrived in a the usual Honda packaging but also inside a bubble wrap envelope that Webike had provided. This meant the threaded sections would no get any damage during transit. The pin hangers a re very well machined and look to be top quality from Honda. The dimensions are the exact same as the one that is pretty good condition. The threaded sections are smooth and clean from any debris. Fitting is just a simple bolt in. The caliper is now fully supported and will continue to be until someone who has no business fixing bikes is concerned. Very pleased with this small purchase, thanks guys View Detail