Gute Dichtungen

About quality and texture - The exhaust system gasket from Kitaco is made from a high temperature metal graphite, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable exhaust leak from the original gasket but since a new exhaust system was being installed I was concerned that the old gasket would not form a good seal with the new header pipe and would leak, so I thought it was best to replace the gasket.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil spinner and filter screen.Difficulty of installation - The installation of the exhaust system gasket is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the gasket into the exhaust port in the cylinder head.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to be great value when compared to what most other companies sell their products for and exhaust system gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the exhaust system gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

This KITACO exhaust gaskets replacements are the best option to use because everytime you take the exhaust out it's always better to replace these.They are not expensive and have the usual KITACO good quality.View Detail

I bought a gasket because I had to replace the monkey bike muffler. I was going to buy the genuine product, but Kitako is also inexpensive and there are two in a set. The material seems to be similar to pure product, and of course, pure product is good, but I think the quality will be good at all because I like the Kitako brand. The installation was simple. The gasket is a consumable product, so it's good to use an extra one later.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is a metal gasket that deforms when pressure is applied to seal between the cylinder head and the exhaust header pipe. About the feeling of use, Serves the same purpose as the Honda gasket, no noticeable difference.Seals well with no exhaust leaks present. Products to buy together, For you exhaust installation it would be ideal to add high temperature silicone to your cart to seal all the other exhaust pipe connections for a zero leak installation. Difficulty of installation, I can say the fitment of the exhaust system gasket for my installation is was very easy due to the ease of access to the exhaust stud nuts and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a gasket to use and a spare made differently from the Honda gasket but serves the same purpose and are priced the same as the Honda gasket. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture: I am happy with the quality of the exhaust system gasket from Kitaco. A compressing gasket with an external diameter of 32mm and an internal diameter of 26mm.About the feeling of use: The exhaust system gasket is a firm fit and holds itself in place once positioned and has sealed the interface between the exhaust port and the exhaust pipe with zero air leaks.Products to buy together: Some replacement exhaust stud nuts would also be desirable to purchase along side exhaust system gasket as mine were cosmetically damaged from using an open end spanner due to the thickness of the exhaust pipe and not being able to use a socket.Difficulty of installation: The process to install took about 30 minutes, loosen the exhaust stud nuts so you can lower the exhaust pipe to access the exhaust port to replace the exhaust system gasket. The old exhaust system gasket was very tight and difficult to remove on this motorcycle and required the use of a small flat screwdriver to lever it up from the bottom edge and I would recommend using something softer as the screwdriver slightly maked up the exhaust port surface. Refit the exhaust stud nuts and tighten to 27N.m.Cost performance and comparison with other products: Good costing as you are getting two quality gaskets from Kitaco that are always in stock and ready to ship but the genuine Honda gasket is slightly cheaper but you have to wait a while for stock to be available.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Kitaco or K-Pit offer many replacement gaskets for the Monkey 125 that can be viewed in the Kitaco engine tuning and maintenance parts catalog and stock is available and ready to ship here on Webike.View Detail