Is purely a cosmetic addition that does wonders improving the ordinary looking factory matte black plastic

There are some conspicuous areas where the processing is messy.
Manufacturer and sales were horrible to deal with.
Manufacturer & seller pushes defective products to the buyer without inspecting them.
I wonder how reluctant they are to handle returns.View Detail

Repair marks on the Crack are so-so and the machining accuracy is poor. And Gap. We tried to be as careful as possible, but there were three cracks. It is not.

I thought the tank was bad and tried it with a different tank, but it did not fit after all.

One Side comes out of the air ductor even if you try to put the tank on the body. It is not possible to use it.

View Detail

About quality and texture - The V2 chain guard from Kitaco is made from aluminum sheet that is shaped from bending and with a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - A subtle looking chain guard due to it black finish and modern styling with it's lightening holes and Kitaco logo. More proportional and appropriately styled for the Honda Monkey 125.Products to buy together - A key product to purchase to add more proportional and appropriately styling to the rear of the Monkey 125 is the V2 fender eliminator from Kitaco. That maintains all the features of the original fender but improves the look.Difficulty of installation - The installation of the chain guard is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to chain guard to the swing arm with the Kitaco allen key bolts.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to be great value when compared to what most other companies sell their products for but this chain guard is priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the chain guard, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The round baren mirrors from Rise Corporation is made using aluminum and injection molded plastic with black surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - The style and quality of these round baren mirrors is impressive for the pricing. The original mirrors were impossible to adjust to obtain a complete rear view, but as these mirrors are wider this is no longer a problem. Products to buy together - If you are looking to enhance the custom look of your Grom, a product you may want to consider to purchase along side the round baren mirrors is a belly fairing.Difficulty of installation - The installation of the round baren mirrors is a simple task that took 0.4 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure these mirrors to the original mounting ponits on the handle bars.Cost performance and comparison with other products - I find the cost of all the products Rise Corporation sell to great value when compared to what most other companies sell their products for and the round baren mirrors are no different.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the round baren mirrors, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - This 181cc piston kit from Kitaco is made from aluminium using cast and machining processes, the quality from the overall fit and finish is perfect.About the feeling of use - Specifically for the lite bore-up kit from Kitaco, this larger 181cc displacement piston is the key to adding usable power to the low RPM range over the original 125cc 2-valve engine setup.Products to buy together - A key product to buy together with this 181cc piston is the type 2 camshaft from Kitaco, that will carry the power into the higher RPM range unlike the original camshaft.Difficulty of installation - The installation of the 181cc piston is an advanced task that took 2.0 hour to complete, with the gapping and alignment of the piston rings taking quite some time. Mechanical aptitude and the use of basic hand tools is what is required to secure piston to the crankshaft and fit it into the cylinder before re-assembling the head and cam chain system.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to be on great value when compared to what most other companies sell their products for and the 181cc piston kit is no different.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the 181cc piston kit I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The breather cap from SP Takegawa is made from billet aluminium with precision machining and an anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The breather cap is a work of art to look at in it's design and finishes and combined with a catch can has resolved my engine oil loss caused from high RPM riding by allowing the oil vapour generated during this period of riding to be directing back to the engine via the clutch cover.Products to buy together - A key product to buy together with the breather cap is a catch can that will allow for the collection and separation of the oil from the vapour output from the engine.Difficulty of installation - The installation of the breather cap is a simple task that took 0.2 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the breather cap to the clutch cover.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the breather cap is no different. The design of this breather cap with it's rotating barbed hose fitting is what sets it apart from the others.About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited.View Detail

About quality and texture - The breather mini filter from Shift Up is made from a dry multi-layered cotton gauze filter with a stainless steel mesh, rubber top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - A necessary addition for my custom catch can install due to not utilising the original airbox, an external air filter was required to connect up directly to the catch can breather port. Very compact in it's design making it perfect to squeeze up into the tight space behind the side fairing.Products to buy together - Another product to purchase when looking to complete a custom catch can install would be some clear breather hose, the clear hose will allow you to monitor any oil or moisture build up leading up to the catch can.Difficulty of installation - The installation of the breather mini filter is a simple task that took 0.1 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to press the breather filter into the catch can barb and secure with the included hose clamp.Cost performance and comparison with other products - I find the cost of all the products Shift Up sell to be on par when compared to what most other companies sell their products for and the breather mini filter is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather mini filter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail