?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68) View more
About quality and texture: I am happy with the quality of the oil filler cap from SP Takegawa, machined from aluminium with a gloss silver anodized surface finish. About the feeling of use: Well worth the purchase to just be able to remove the OEM plastic oil filler cap but with it's subtle styling the SP Takegawa oil filler cap adds to the other high quality finishes on the Monkey 125. Products to buy together: The left hand engine cover timing and crank caps from SP Takegawa would also be desirable to purchase along side the oil filler cap to add some matched styling to the other side of the engine. Difficulty of installation: The process to install takes 5 minutes, remove the OEM oil filler cap and install and tighten the oil filler cap using a single hex socket to avoid damaging the aluminium. Not difficult to do. Cost performance and comparison with other products: Great costing as you are getting a very high quality manufactured and designed oil filler cap for a good, there are not many cheaper options made from aluminium but you can spend much more from brands like G-Craft and Yoshimura. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking for a nicely styled and quality oil filler plug for your Monkey 125 then go for it, available in a variety of colours too.
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
About quality and texture - The oil filler cap from SP Takegawa is made from billet aluminium with precision machining and a silver anodized surface finish while the quality from the overall fit and finish is perfect.About the feeling of use - The wonderful design of the oil filler cap does wonders increasing the appeal of on the Monkey 125 by allowing the removal of the original plastic and less then ideal oil filler cap from Honda.Products to buy together - A key product to purchase to further increase the appeal of the Monkey 125 by the removal of more of the original plastic parts, would be the noticably large front fork guards that are available in a slimmer aluminium finish from a few aftermarket suppliers.Difficulty of installation - The installation of the oil filler cap is a simple task that took 0.1 of an hour to complete. common sense and the use of basic hand tools is all that is required to secure the oil filler cap to the engine case.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the oil filler cap is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filler cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
It's a product with good quality and texture informationFor usability, the engine case can be marked with red dotsEasy to installCost performance and comparative price are similar to other products and can be replaced by the brand you wantWeBike packaging is always good. Shipping and packaging will arrive in a weekStd oil caps can be released by hand, but these products need tools m17 socketView Detail
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all red anodized finish. About the feeling of use, The oil filler cap is of a strong construction with a detailed design when compared to the original plain grey plastic one and adds a quality finish to the engine cover. Products to buy together, Other high quality parts to help improve the look of other original plain looking parts like the tappet covers would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the oil filler cap for my installation was very easy due to the ease of access and simple nature of securing the cap into the engine cover using just a socket. Cost performance and comparison with other products, The pricing of the product is great. You receive a detailed part made from higher quality material with a matching finish. There are cheaper options available but this are well worth the money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
About quality and texture - The oil filter element from SP Takegawa is made using steel, paper and rubber, the quality from the overall fit and finish is perfect.About the feeling of use - The official oil filter for the SP Takegawa clutch cover that I have installed on my Monkey 125. The oil filter does an amazing job filtering the engine oil when compared to the original oil filter rotor.Products to buy together - A key product to purchase when performing scheluled maintenance on the engine is new O-Rings for the valve inspection covers as they tend to also leak over time when removing the covers for the valve clearance checks.Difficulty of installation - The installation of the oil filer element is an simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools are required to install the oil filter into the filter housing on the SP Takegawa clutch cover.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what some of the other companies sell their products for but that is not the case this time as the price is significantly higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter element, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: HONDA CBR125R (JC50-1000001-), HONDA 400X , HONDA CRF250M (MD38-1100001-), HONDA CBR400R 13-21 NC47, HONDA NC700X
About quality and texture - The oil filler cap from SP Takegawa is made from billet aluminium with precision machining and a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The wonderful design of the oil filler cap does wonders increasing the appeal of on the Grom by allowing the removal of the original plastic and less then ideal oil filler cap from Honda.Products to buy together - A key product to purchase to further increase the appeal of the Grom by the removal of more of the original parts, would be the generator cover caps that are available in a matching billet aluminium design.Difficulty of installation - The installation of the oil filler cap is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the oil filler cap to the engine case.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the oil filler cap is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filler cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
About quality and texture - The oil filler cap from SP Takegawa is made from billet aluminium with precision machining and a silver anodized surface finish while the quality from the overall fit and finish is perfect.About the feeling of use - The wonderful design of the oil filler cap does wonders increasing the appeal of on the Monkey 125 by allowing the removal of the original plastic and less then ideal oil filler cap from Honda.Products to buy together - A key product to purchase to further increase the appeal of the Monkey 125 by the removal of more of the original plastic parts, would be the noticably large front fork guards that are available in a slimmer aluminium finish from a few aftermarket suppliers.Difficulty of installation - The installation of the oil filler cap is a simple task that took 0.1 of an hour to complete. common sense and the use of basic hand tools is all that is required to secure the oil filler cap to the engine case.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the oil filler cap is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filler cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
It's a product with good quality and texture informationFor usability, the engine case can be marked with red dotsEasy to installCost performance and comparative price are similar to other products and can be replaced by the brand you wantWeBike packaging is always good. Shipping and packaging will arrive in a weekStd oil caps can be released by hand, but these products need tools m17 socketView Detail
Fits: YAMAHA XSR125 (BVF1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA MT-125 (BVE1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CROSSCUB110 (JA60)*The oil level must be checked by using the genuine oil filler cap during oil inspection., YAMAHA YZF-R125 (BVD1)*The oil level must be checked by using the genuine oil filler cap during oil inspection., HONDA CL500 (PC68)
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all red anodized finish. About the feeling of use, The oil filler cap is of a strong construction with a detailed design when compared to the original plain grey plastic one and adds a quality finish to the engine cover. Products to buy together, Other high quality parts to help improve the look of other original plain looking parts like the tappet covers would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the oil filler cap for my installation was very easy due to the ease of access and simple nature of securing the cap into the engine cover using just a socket. Cost performance and comparison with other products, The pricing of the product is great. You receive a detailed part made from higher quality material with a matching finish. There are cheaper options available but this are well worth the money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
Fits: HONDA GROM 21 Thailand [Vehicle type]JC92 [Engine type]JC92E, HONDA GROM 21 Domestic model [Vehicle type]2BJ-JC92 [Engine type]JC92E
About quality and texture: I am happy with the quality of the stainless steel header pipe and satin stainless steel muffler which is finished with a unique carbon fibre end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This muffler design is on a larger proportion for the Grom but it manages to create a big bike sound from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I will be going with an open air intake from Kitaco. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail
About quality and texture: I am happy with the quality of the stainless steel header pipe and polished stainless steel muffler which is finished with a unique designed end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This exhaust system design and proportions are well suited to the Grom and it manages to generate an enjoyable exhaust note from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I chose to go with an open air intake from Chimera. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended and modification to the rearset is needed for the third generation Grom. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail
Fits: HONDA GROM 13-15|16|17-20, HONDA GROM 13-15|16|17-20
About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View Detail
Fits: HONDA glom MSX125(JC61-1000001-), HONDA SUPER CUBC125 (JA48), HONDA MONKEY125 (JB02)
About quality and texture: I am happy with the quality of the sports camshaft from SP Takegawa, wonderful machining throughout and great quality bearings fitted. About the feeling of use: I was looking for a camshaft to make the 125cc engine higher revving which it has and I'm really happy with how it performs on the open road with no real loss of power in the lower RPMs which is ideal for around town. Products to buy together: Some type of fuel controller is needed to be purchase along side the sports camshaft, the SP Takegawa FICON 2 is well suited to this type of performance modification. Difficulty of installation: The process to install takes about half an hour, was an easy job to complete after reading through the Honda service manual directions. Not difficult to do. Cost performance and comparison with other products: High costing, the cheapest high RPM camshaft available here on Webike is the Endurance hi-power camshaft but does not look to have a power curve anywhere near as good. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Webike has many camshaft to choose from and the choice is difficult, much research is required to get as close as possible to your desired performance outcome.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING