■Brake Caliper 2 points
■Inner dimensions of the box: Approx. 22.6cm x 16.6cm x 11.2cm
*Not available for overseas orders
[Attention about anodizing service "KOHKEN ALMA BOX for caliper"]
Thank you for purchasing "KOKEN ALMA BOX for 1 Caliper" and "KOKEN ALMA BOX for 2 Calipers".
This document describes the precautions to be taken when requesting anodizing with "Kohken ALMA BOX for 1 Caliper" and "Kohken ALMA BOX for 2 Calipers".
You may use this service only if you have read this notice carefully and have signed and checked the attached agreement.
If you do not agree to the terms of this agreement, do not sign or check the box, or do not fill in the required information, you will not be accepted for this service.
[Order Notes]
・The parts to be packed in "KOKEN ALMA BOX for Calipers" are limited to motorcycle specific brake calipers.
Other calipers will not be accepted.
If ordering "for 1 caliper", you must order 1 caliper, if ordering "for 2 calipers", you must order 2 calipers with the same color.
You order by color within the specified number of items.
In such a case, the difference in price will be charged separately by cash on delivery.
・The parts to be packed in "KOKEN ALMA BOX for Caliper" are limited to aluminum products.
Anodized aluminum can only be applied to aluminum products.
Please do not add other metals (iron, stainless steel, titanium, copper, etc.).
・In principle, no refunds will be made even if you are not satisfied with the finished product, as long as you have filled out the attached consent form.
・If for some reason KOHKEN is unable to anodize the part you have sent them, or if the part you have sent them is different from the one you have ordered, they will send it back to you with payment on delivery.
[Shipping Notes]
・Please make sure that the packaging does not scratch or dent the important parts.
Please note that Koken is not responsible for any damage or dents caused during transportation.
・Please make sure to check "1 caliper" or "2 calipers" on the attached application form.
If you do not fill in the form, please note that Kohken cannot accept any claim for loss of parts.
・When shipping out the parts, please make sure to use the shipping slip (invoice) included in the package.
If you use any other invoice, we will send the item back to you unprocessed.
In that case, it will charge you the handling and shipping fees on delivery.
[Notes on anodizing]
・The caliper to be anodized must be completely disassembled (including inner parts).
・Some types of calipers are painted (including logo paint).
In such a case, exfoliation of the plating will be necessary, and the cost of the stripping work will be charged separately by cash on delivery.
The logo part is painted by stripper and the body part is painted by sandblasting.
・Some types of calipers are plated.
In such a case, exfoliation of the plating will be necessary, and the cost of the stripping work will be charged separately by cash on delivery.
・Depending on the type of caliper, the oil line may be opened from the outside (YAMAHA stock MOS caliper, some Bellringer calipers, etc.).
That type uses iron screws to fill the holes in the oil lines, which are melted by the anodizing process.
・As anodizing, everything will be dyed (including the logo part).
This service is for anodizing only, but we can also offer logo cutting and logo painting as an optional menu (additional charge by COD).
Please fill out the attached "Kohken Alma BOX for Caliper" agreement and application form.
*KOHKEN may not be able to accept your request due to the condition of the caliper.
・The slide pin attached to the slide pin type caliper is also made of iron, so please remove the slide pin when you ask KOHKEN, or they will not be able to accept any claims even if you treat it as is.
・Please clean the parts beforehand as sending it back to KOHKEN DENKA.
Due to the process of anodizing, KOKEN will clean the product, but it may not be possible to completely remove the oil and grease adhering to the thread locking agent and the screw holes that are not penetrated.
If those foreign substances become masking effects or drip somewhere in the treatment process, it may cause anodic defects (unevenness in dyeing, flaking, etc.).
Please note that KOKEN is not responsible for such cases.
・It is not recommended to peel off the anodized aluminum by yourself when re-anodizing.
At KOKEN, re-anodizing is available at a price that includes anodizing stripping.The anodizing exfoliation process is one of the processes that greatly affects the finish.
If you do the exfoliation work by yourself, it may cause problems such as "rough surface of aluminum" or "strange surface color".
Please note that KOKEN is not responsible for such cases.
・The finish of re-anodizing depends on the material of aluminum.
It also reflects the current status of the parts.
The laser etched parts will disappear by re-anodizing (the character mark will remain).
・If there are scratches or corrosion on the parts you currently use, they will be anodized as they are, so the scratches, corrosion marks and dents will not disappear.
Re-anodizing does not guarantee that the part will look like new.
・In the event of a defect in the anodizing process due to the negligence of KOHKEN, in principle, KOHKEN will only guarantee the cost of treatment of the defective product.
The warranty does not cover any other secondary liability.
[Note on delivery time]
Please note that the delivery date will be extended if there are omissions in the required information.
・If there are any parts that cannot be anodized as they are during the inspection after arrival, KOHKEN will contact the customer for confirmation.
In that case, the delivery time will be extended due to the interruption of work.