[How is it used?
Installed on CRF250L (MD47).
It is used for Touring and forest roads.
Was the one you received as per Image?
It is as shown in the Image. It is not cheap.
Looks strong.
Was the installation difficult?
I heard that the OEMHandlebar has Weight in it, and it is easier to install the hand guard if it is replaced with an external Handlebar.
When attaching to an OEMHandlebar, a screw about 45mm long can be used for installation, but it is delicate in terms of strength.
The installation itself is relatively easy since there are not many parts.
How was your experience with it?
I haven't tipped it over yet so I don't know how well it protects, but it looks and feels good.
The Handlebar area is always in view, which is satisfying.
Items to buy together
The ZETA hand guard is a must have. It makes it look even better.
11,204.95 ~ BDT (13,508 JPY) 12,774.38 BDT Save 12%
Delivery Information
-
Please select product form first.
Product detail
Old Part Number
F5351(ZE72-6001)
F5352(ZE72-6003)
[Set components]
Adventure armor handguard body
U Clamp Kit
Exclusive bar end kit
[Size]
Handlebar outer diameter: 22.2mm
Handlebar inner diameter: Φ13.5-19mm
**When installing on a handlebar with a brace, make sure that there is enough space for the U-clamp.
*Optional bumpers and sliders (sold separately) can be installed.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
.
High rigidity aluminum alloy handguard designed for adventure tourers and handlebars with short overall handlebar length and large bending angle.
The overall length of the guard body has been shortened to reduce interference with the cowl / windshield and meter, and a flat head bolt has been adopted for the connection to the U-clamp to eliminate protrusion and further reduce interference with the windshield.
Spacers are included for the bar ends to adjust the position of the guard body to prevent interference with the lever ends.
The protectors for Armor Gurad can be installed on all models.
Two types of bar end spacers are included to prevent interference with the levers and to fine tune the installation.
By installing the spacer, it is possible to install the guard with the throttle and switch box in the stock position.
The long type U-clamp is designed to avoid brake hoses, banjos and wires.
Armor handguard protector (sold separately) can be attached.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Jul 26, 2022
Peace of mind and Parenthesis goodness!
Nov 8, 2021
I think it's cool to increase the ruggedness. As for the installation, if you install the UClamp in the reference image with the convex on the top, you can see the difference when you install the Guard. Ha. I had the impression that it would make my face look troubled, so it would be closer to the horizontal if I wore it with a convex shape on the bottom.
View DetailJul 3, 2021
I can only install this Guard on my ZETA comp bar on my crf250l MD47, but it's sturdy and very nice!
View DetailJun 28, 2021
I bought this AdventureArmor Handguard because it seems to be the only one that can be attached to the ZETA COMPHandlebar.
Can't wait to install it!
Jun 3, 2021
CRF250RALLY 2021 Non-conforming
ZETA Zeta Adventure Armor Handguard
Item Number:ZE72-6001
■Type. [Product Contents] Bar EndKit for AdventureArmor HandguardBodyUClamp kit [Size] HandlebarOuter Diameter:22.2mmHandlebar inner diameter:Φ13.5-19mm
Remarks：Color:Black/ *When you install it with BraceHandlebar, please check if UClamp has a space for installation.*There are cases that it contains other color in the photo.
Please note:The manufacturer has not been able to confirm the installation results of the vehicle in question, so we are unable to answer questions regarding compatibility.
CRF250RALLY 2021 Non-conforming
New Custom Articles
