- WR250r, whose buttocks are sore anyway from touring on forest roadsI thought about Gel Zab, etc., but I felt that the fundamental solution was not to increase the sitting area, so I bought a High seat...Read More
- Fits:
- YAMAHA WR250RX 07-17 (3D7C)* The heat spot on the right side is not on the fingertip but on the palm of the hand
- so you may feel the temperature difference between the left and right side.
- YAMAHA WR250RX 07-17 (3D7B)*The heat spot on the right side is on the palm side
- not on the fingertip side
- so you may feel the temperature difference between the left and right side.
- ...and more.
Installed on TouringSEROW.Wiring, for example, was done without hesitation, referring to information on Net. The rest of the process, such as the extra wiring, required Sense, and I managed to put it ...Read More - Fits:
- YAMAHA WR250R 3D71
- YAMAHA WR250R 3D73
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D79
- ...and more.
OEM Quantity because the exterior was done.:Replaced by Set.Cheaper than you can get at Rose.All the grommets are included, so you don't have to forget to write anything down, and only the Bolt needs ...Read More - Fits:
- YAMAHA Cerro 250 3C51
- YAMAHA Cerro 250 3C52
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA Cerro 250 3C55
- ...and more.
Installed on Yamaha ST225 BRONCO.Installation is a snap!I installed it and promptly tipped it over.In the middle of the scrub, he was knocked off his feet by the incline and fell to the ground.I was d...Read More - Fits:
- BMW F800R
- BMW R1200R
- DUCATI MONSTER S2
- SUZUKI SV400
- SUZUKI GSX1400
- ...and more.
I keep mine in the garage, but I bought it to keep the cobwebs away.In the case of the SEROW 250, the hems of the front and rear Center sections reach the ground.It would be great if the height could ...Read More - Fits:
- YAMAHA WR250R (3D7H)
- YAMAHA WR250X (3D7J)
I bought it to do my own maintenance. The price is quite high, but it's worth having.Read More - Fits:
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D71
- ...and more.
I bought another ZETA SX3 bar for my wife's Course-only WR250X.The OEM quality, lightweight and sturdy construction is Race ish without any waste.The look is the same as the OEM, and the height and mo...Read More - Fits:
- YAMAHA TT250R Raid 4GY3
- YAMAHA TT250R Raid 4GY1
- YAMAHA TT250R 4RR2
- YAMAHA TT250R 4RR1
- YAMAHA TT250R 4GY5
- ...and more.
[How is it used?I am using it on a SEROW 225.I've taken care of you a few times. wWas the one you received as per Image?The outside was as Image, I'm glad it has an OEM look.The Sponge is a bit smalle...Read More - Fits:
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D71
- ...and more.
I also put this one of Y's Gear on my wife's WR250X for Course.I used to use the upper clamp with zetasxStabilizer, but Y's Gear's upper clamp has HandlebarSetting scale, so I used Y's Gear's clamp fo...Read More - Fits:
- YAMAHA TT250R Raid 4GY3
- YAMAHA TT250R Raid 4GY1
- YAMAHA TT250R 4RR2
- YAMAHA TT250R 4RR1
- YAMAHA TT250R 4GY5
- ...and more.
Design and the North American YamahaGYTRBrand are cool items.It also comes with a GYTRSticker as an added bonus.BestBut the durability is not good. It should be replaced in 6 months to 1 year.It's tim...Read More - Fits:
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D71
- ...and more.
I chose this in order to install the Taper Bar of YZ250FX to my wife's Course running exclusive vehicle WR250X 2009.It is thought to be the same Parts as the Handlebar Clamp of 2006 YZ250, but this Qu...Read More - Fits:
- YAMAHA WR250R 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA WR250F 5UMC|F|L|M|R
- YAMAHA WR250X 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA XT250 3C51|2|3|4|5|6|7|C|M|S|Y
- YAMAHA tricker 5XT1|2|3|4|5|6|7|8|9|A
- ...and more.
I don't have to tell you, OEM Parts, what's the problem?The OEMO-ring part number for the WR250R is 93210-07135 for the small one and 93210-47675 for the large one.Read More - Fits:
- YAMAHA WR250R 3D71
- YAMAHA WR250R 3D73
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D79
- ...and more.
Quantity of short lever for RALLY50:Pair (for Left and Right) I was using it with a GEAR, but the brake lever had no problem and the feeling of use was good, but as for the Clutch lever, the width of ...Read More - Fits:
- BMW F800R
- BMW R1200R
- DUCATI MONSTER S2
- SUZUKI SV400
- SUZUKI GSX1400
- ...and more.
I used Cover of Black color, but Black color came to stick to Motorcycle whether it deteriorated with age, and I replaced it.It's lighter than the old one and the Blue line makes it easy to see the fr...Read More - Fits:
- KAWASAKI
- KAWASAKI
- HONDA
- HONDA
- KAWASAKI
- ...and more.
A little pricey, but the texture and feel is excellent!Read More - Fits:
- YAMAHA WR250RX 07-17 (3D7C)* The heat spot on the right side is not on the fingertip but on the palm of the hand
- so you may feel the temperature difference between the left and right side.
- YAMAHA WR250RX 07-17 (3D7B)*The heat spot on the right side is on the palm side
- not on the fingertip side
- so you may feel the temperature difference between the left and right side.
- ...and more.
It hasn't gotten cold yet, so this will be my impression of the installation, not the use!This time, it was installed in SEROW250!The most difficult part is to take out the Connector which connects Wi...Read More - Fits:
- YAMAHA TT250R Raid 4GY3
- YAMAHA TT250R Raid 4GY1
- YAMAHA TT250R 4RR2
- YAMAHA TT250R 4RR1
- YAMAHA TT250R 4GY5
- ...and more.
I bought a long pad and I had to cut both sides of the pad because it was too long. The pad material is not urethane but foam, so the price is reasonable.Read More - Fits:
- YAMAHA WR250R 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA WR250F 5UMC|F|L|M|R
- YAMAHA WR250X 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA XT250 3C51|2|3|4|5|6|7|C|M|S|Y
- YAMAHA tricker 5XT1|2|3|4|5|6|7|8|9|A
- ...and more.
I haven't used it yet, but I'm sure it's OEM.I'm looking forward to the exchange.Read More - Fits:
- YAMAHA Cerro 250 3C51|3C52|3C53|3C54|3C55|3C56|3C57|3C5C|3C5M|3C5S
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA WR250X 3D76
- YAMAHA WR250X 3D78
- ...and more.
[How is it used?I installed it on my 1998 SEROW225WE, which is a city driving Main.Was the one you received as per Image?Just like the image!This is a product that was already on the market before I s...Read More - Fits:
- BMW F800R
- BMW R1200R
- DUCATI MONSTER S2
- SUZUKI SV400
- SUZUKI GSX1400
- ...and more.
I think I used it for over 5 years and it finally tore.It lasts a long time and I have no complaints, so I bought the same product. All the Motorcycle Covers I use are now Yamaha's.This time I bought ...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING