- Fits:
- SUZUKI GSX250R 18-21 *A separate Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI V-STROM650 07-09|12|14-19 DL650/K7/K8/K9/L2/L4/L5/L6/L7/L8/L9 *If you have Kijima throttle pipe part number 201-5371 separately
- it will be useful for installation.
- SUZUKI GSX-S1000 17-18 L7/L8 *Special Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI GSX-R750 08-09|11-19 K8/K9/L1/L2/L3/L4/L5/L6/L7/L8/L9 *If Kijima throttle pipe part number 201-5371 is separately available for installation
- ...and more.
This is 3rd time i use Kijima grip heater.
I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without ad...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!
I have good luck with most all webike products.
I purchased 1 of these along with the associated heated lock...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful
I'm willing to install it on my other bike.Read More - Fits:
- KAWASAKI Z650RS 24
- KAWASAKI ELIMINATOR 24
- KAWASAKI Ninja ZX-4R SE 23
- KAWASAKI Ninja ZX-4R RR 23
- KAWASAKI Ninja ZX-25R 21-24
- ...and more.
About quality and texture - not the best quality for price.
About the feeling of use - feels ok
Cost performance and comparison with other products - Too pricey.Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
Second time use kijima heated grip. I used gh08 last time and this time gh10.
It is quite easy for install and internal switch makes handle bar clean.
Highly recommend this heated grip.Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heati...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
我的摩托是YAMAHA XMAX300,一直都想改装一款加热手把,在别的网站上害怕买到不好的产品,所以我在webike上购买了这款KIJIMA加热手把,这款加热手把支持各种型号的摩托安装,安装简便,需要注意的是需要专业人士接线。实际体验后加热效果很好。Read More - Fits:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...and more.
these steel ball bearing look same as OEM. Buy with confident because IT'S MADE IN JAPAN.. My TW200 had 70k Kilometers done. I replaced my bike ball bearing at 40000km,after that never touched the bea...Read More - Fits:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...and more.
As I was already replacing the old worn parts for the foot rests, I decided to go for these non genuine ones as they are just ball bearings and I needed a few.
Very well made, exact to specifications...Read More - Fits:
- HONDA CB400FOUR (water-cooled)
- HONDA CBR1100XX SUPERBLACKBIRD
- HONDA VTR250
- KAWASAKI NINJA650 R
- HONDA XR250 R
- ...and more.
The OEM grips on my HONDA SCOOPY110 are getting dirty and the insides are starting to wear out. So I installed this product. This product of Italian Domino brand looks mature and cool. When riding wit...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
I live in Canada and heated grip are not a luxury. It allows me to use my motorcycle a few additional months. These grips are great quality, easy to install and offers allot of heat settings to make m...Read More - Fits:
- YAMAHA MT-07 M16/M8 type
- YAMAHA XSR700 M16/M8 type
- YAMAHA MT-09 14-20
- YAMAHA XSR900 M16/M8 type
- KAWASAKI Z250 M16/M8 type
- ...and more.
I live in an area at about 900 elevation. My fingertips get cold during the cold season. I am trying various things. I bought it on impulse. It is summer, but I put it on, and since it is only support...Read More - Fits:
- HONDA CB400FOUR (water-cooled)
- HONDA CBR1100XX SUPERBLACKBIRD
- HONDA VTR250
- KAWASAKI NINJA650 R
- HONDA XR250 R
- ...and more.
The SR OEMGrip makes my hands sore and the throttle slippery after long rides.I thought it might be vibration, but I also wondered if the Large size of my hand and the thickness of the Grip did not ma...Read More - Fits:
- HONDA CB400FOUR (water-cooled)
- HONDA CBR1100XX SUPERBLACKBIRD
- HONDA VTR250
- KAWASAKI NINJA650 R
- HONDA XR250 R
- ...and more.
The delivery is fast
The product is good, too
I'll introduce it to people around me
Please take good care of me next time, tooRead More - Fits:
- KAWASAKI Z400 19-21
- KAWASAKI
- KAWASAKI Z250 13-21
- KAWASAKI
- KAWASAKI
- ...and more.
At the shortest setting, it's just enough for two fingers on the lever. Click adjustment is also easy to do on-the-fly without having to look down.Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
[How is it used?I purchased and installed this product for use in Touring during the winter months.Was the one you received as per Image?The Grip diameter was almost the same as OEM.Was the installati...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
"NC750X直接安装,120长度正好,不影响护手安装,完美配合,安装市场半个小时,安装后手感佳,温控分档细!目前南京0度气温,2到3档足够使用。
----------------------------------------------------------
NC750X is installed directly, 120 long, does not affect the h...Read More - Fits:
- KAWASAKI Z400 19-
- KAWASAKI Z250SL 16-17
- KAWASAKI Z250 19-
- KAWASAKI Z250 13-17
- KAWASAKI
- ...and more.
[How is it used?On the Ninja 400, the OEM is too far away from the levers and has no adjustability.Was the installation difficult?If you have a solid tool, even an amateur can do it in 30 minutes.How ...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
The design is not cheap, and the warmth is effective.It's a good fit.There will be a gap of about 5mm.That's the only thing I don't agree with...Ninja400 EX400-ERead More - Fits:
- KAWASAKI NINJA 250SL 15-18
- KAWASAKI NINJA 250 08-22
- KAWASAKI NINJA 250R 08-22
- KAWASAKI NINJA 300 13-16
- KAWASAKI NINJA 400 18-23
- ...and more.
When I installed it in the same position as NORMAL, it interfered with Cowl. If you can't adjust it the same way as NORMAL, don't say it fits. I have a ABSMODEL and was refused to return it, even thou...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING